Storage Times - Bosch Rexroth Sytronix FcP 50 Series Operating Instructions Manual

DOK-SYTROX-MPES2******-IT01-EN-P
Rexroth Sytronix FcP 50xx/70xx Motor-Pump Unit MPES2
6.6

Storage Times

LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Additional measures must be taken before storage and on commissioning to
preserve proper functioning – irrespective of the storage time which may be
longer than the warranty period of our products. However, this does not
involve any additional warranty claims.
Motors
Bearing time / months
Measures for commissioning
> 1 < 24 > 24
● ● ● Control all parts to be free of damage.
● ● Check all electrical contacts to be free from corrosion.
Manually turn the motor shaft in regular distances (min. 1x per
● ●
year) to spread the grease consistently.
● ● Running in the motor without load at startup.
Additonally, in the case of a storage time of more than 2 years,
●
change the motor bearings.
Tab. 6-7: Measures before commissioning motors that have been stored over a
prolonged period of time
Cables and Connectors
Bearing time / months
Measures for commissioning
> 1 > 12 > 60
● ● ● Control all parts to be free of damage.
● ● Check all electrical contacts to be free from corrosion.
Visually inspect the cable jacket. Do not use the cable if you de‐
● tect any abnormalities (squeezed or kinked spots, color devia‐
tions, ...).
Tab. 6-8: Measure before commissioning cables and connectors that have been
stored over a prolonged period of time
PGx
Bearing time / months
Measures for storage
< 9 < 24 > 24
Let the internal gear pump in its delivery state (moistened with
●
mineral oil)
● ● Fill the internal gear pump with mineral oil
Measures for commissioning
Before mounting, check the complete internal gear pump for dam‐
● ● ●
age and corrosion.
At a test run, check the internal gear pump for functionality and
● ● ●
leakproofness.
● Change the shaft sealing ring.
After the maximum storage time (24 months) we recommend a
● preventive check of the internal gear pump with change of the
sealings by the responsible Rexroth service!
Tab. 6-9: Measures for storage and before commissioning internal gear pumps
that have been stored over a prolonged period of time
Bosch Rexroth AG 45/143
Transport and Storage