Disassemble And Change The Pump; Tools Required; Preparing Disassembly; Disassembling The Internal Gear Pump - Bosch Rexroth Sytronix FcP 50 Series Operating Instructions Manual

Motor-pump unit mpes2
Table of Contents

Advertisement

86/143
Bosch Rexroth AG
Disassembly and Exchange
12.2

Disassemble and Change the Pump

12.2.1

Tools Required

12.3

Preparing Disassembly

12.4

Disassembling the internal gear pump

LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Rexroth Sytronix FcP 50xx/70xx Motor-Pump Unit MPES2
Disassembly of the pump can be done with standard tools. No special tools
are needed.
Decommission the overall system as described in the system's operating in‐
struction. Then prepare the disassembly of the pump as follows:
CAUTION
Slipping may cause serious injuries. When removing shaft protection, protec‐
tive plugs and flange covers, residual oil may leak at zero pressure.
Immediately absorb leaking residual oil.
Depressurize the pressure side (P line).
Ensure that the relevant system parts are depressurized and de-ener‐
gized.
In order to disassemble the pump, proceed as follows:
CAUTION
Slipping may cause serious injuries. When removing shaft protection, protec‐
tive plugs and flange covers, residual oil may leak at zero pressure.
Immediately absorb leaking residual oil.
NOTICE
Damages to the pump and risk of injuries in case of disassembly of the pump
while the hydraulic system is pressurized.
Depressurize the system before starting any works at the pump.
WARNING
Pumps that are falling down may cause serious injuries.
Use suitable lifting gear for lifting the pump.
For lifting the pump, always use the enclosed eyebolt or a belt.
Observe the prescribed position of the transport loops.
1. Check, whether the hydraulic system is pressureless.
2. Let the pump cool down, so it can be disassembled without any danger.
3. Shut off the suction port of the pump. When doing so, observe the in‐
structions of the system's operating instruction.
DOK-SYTROX-MPES2******-IT01-EN-P
Slip hazard!
Slip hazard!
Risk of injuries when disassembling under
pressure!
Crush injuries and fractures!

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rexroth sytronix fcp 70 series

Table of Contents