HP CodeMaster XL+ M1722A User Manual page 90

Installation and Setup
Setup
Table 1-1 Setup Menu 1 Settings
Setting Choices
Time HH:MM
Date DD MMM YY
Armed Tone ON, OFF
CRT Alerts ON, OFF
Alert Volume 3 to 15
Mode after CV SYNC, DEFIB
Pacer Rate (pacer 70 (ppm), 40 to 180 in increments of 10
option only)
Pacer Output 30 (mA), 30 to 200 in increments of 10
(pacer option
only)
Table 1-2 Setup Menu 2 Settings
Setting Choices
Recorder Delay Delay 6s, No Delay
Recorder BW Monitor, Diagnostic
Record on Mark ON, OFF
Record on Charge ON, OFF
Record on Shock ON, OFF
Record on Alarms ON, OFF
Post Shock Data ON, OFF
Power On Lead PADDLES, LEAD I, LEAD II, LEAD III
Patient Cable 3 WIRE, 5 WIRE
Notch Filter 60 HZ, 50 HZ, ON, OFF
A-10
Description
Current time
Current date
Beep on Charge done
Beep on alert message
Alerts volume
Specifies mode after cardioversion
Sets the pacer rate and the initial power-on
default rate.
Sets the pacer current and the initial power-on
default pacer current.
Description
Printout is delayed 6 seconds or immediate
Bandwidth (recorder only)
Records during mark
Records during charge
Records during discharge
Records during alarms.
ON prints the delivered energy statistics.
OFF prints Energy Select control setting.
Sets the ECG monitoring source that
appears when you turn on the instrument.