Safety Considerations - HP CodeMaster XL+ M1722A User Manual

Getting acquainted

Safety considerations

Table 1-7 Audible Indicators
Indicator
Charge Done tone
Auto disarm tone
QRS beeper
CRT alerts
HR alarms
SpO
Shutdown warn-
ing
Safety considerations
1
The CodeMaster XL+ stores high voltage energy and is capable of delivering up to
360 joules of DC energy to a 50 ohm impedance.
• To remove power from the instrument, you must turn the Energy Select control to
• To disarm a charged instrument, use one of three methods:
1-8
Description
Sounds when instrument is charged and ready to deliver a shock.
Can be disabled in setup.
Sounds during the last ten seconds of the Charge Done tone. Beeps
intermittently until disarmed.
Sounds whenever an R-wave is detected. Volume controlled by front
panel adjustment.
Three beeps each time a message appears on the screen. Can be dis-
abled in setup.
Sounds if the heart rate is above the higher alarm limit or below the
lower alarm limit.
alarm Sounds if the SpO
2
below the low SpO
Alternating pitch sounds for 60 seconds when the system is about to
turn off. An alert to plug the unit into AC power.
Off (Standby). Disconnecting the CodeMaster XL+ from an AC outlet will not
remove power because the instrument is battery powered.
Turn the Energy Select control from an energy level setting to the Monitor On or
m
Off (Standby) position.
or
level is above the high SpO
2
alarm limit.
2
alarm limit or
2