Oximeter; Dreamstation Roll Stand; Supplemental Oxygen; Sd Card - Philips Respironics E30 User Manual

Ventilation solution

Table of Contents

Philips Respironics E30 User Manual

To clean the module, remove the module from the therapy device. Wipe the outside of the device

with a cloth slightly dampened with water and a mild detergent. Let the device dry completely before

reinstalling into the therapy device.

Dispose of the module following the same disposal instructions for your therapy device.

5.3

Oximeter

The DreamStation oximetry system, when part of the Philips Respironics E30 device, measures and

displays %SpO

and heart rate in adult and pediatric patients.

Warning

Use only Philips Respironics recommended SpO

incompatible sensors can result in inaccurate pulse oximeter performance.

5.4

There is a roll stand available for use with your device. Please see the instructions included with your roll

stand for more information.

5.5

Oxygen may be added anywhere in the patient circuit up to 30 LPM of low flow oxygen into the patient

circuit, and up to 60 LPM of low flow oxygen into the inlet of the device.

Please note the warnings in Chapter 1 when using oxygen with the device.

The device does not come with an SD card, but does have an SD card slot on the side of the device. If

inserted, an SD card can record information.

Accessories

cables and pulse oximeter sensors. Use of

Table of Contents

1146562