Specifications, End Of Use, And Emc; Specifications - Philips Respironics E30 User Manual

7. Specifications, end of use, and EMC

7.1

Specifications

7.1.1 Environmental
Operating Temperature
Storage Temperature
Relative Humidity (operating & storage) 15 to 95% (non-condensing)
Atmospheric Pressure:
7.1.2 Physical
Dimensions
Weight (Device with power supply)
7.1.3 Service life
The Philips Respironics E30 Ventilator is provided globally for use under local emergency use
authorizations, such as the US Food and Drug Administration (FDA) Emergency Use Authorization (EUA) for
ventilators, Health Canada Interim Order for use in relation to COVID-19, and waiver of CE marking, which
authorize its use for the duration of the COVID-19 public health emergency, unless terminated or revoked
(after which the products may no longer be used).
7.1.4 Standards compliance
This device is designed to conform to the following standards:
• IEC 60601-1 General Requirements for Basic Safety and Essential Performance of Medical Electrical
Equipment
• EN 60601-1-2 Electromagnetic Compatibility
7.1.5 IEC 60601-1 classification
Type of Protection Against Electric Shock
Degree of Protection Against Electric Shock
Degree of Protection against Ingress of
Water
Mode of Operation
5°C to 35°C (41°F to 95°F)
-20°C to 60°C (-4°F to 140°F)
101 to 77 kPa (0 - 2286 m / 0 - 7500 ft)
15.7 x 19.3 x 8.4 cm (6.2" L x 7.6" W x 3.3" H)
Approximately 1.28 kg (2.83 lbs)
Class II Equipment
Type BF Applied Part
Device: Drip Proof, IP22
Link Module: Drip Proof, IP22
80W power supply: Drip Proof, IP22
Continuous