Huawei Telepresence TP3106 Installation Manual page 112

HUAWEI TP3106&TP3118S&TP3118 Telepresence
Installation Guide
Figure 11-24 DIP switch
Step 2 To prevent the power fuse from being burnt out, set the DIP switch based on the standard voltage
of the device delivery region.
l If the standard voltage is 220 V, retain the default settings (230 V).
l If the standard voltage is 110 V, turn the DIP switch to -100-120V.
Step 3 Remove the transparent sticker from the power port, as shown in
delivered region-specific power cable to the power port.
Figure 11-25 Power port
Step 4 Place the two speaker chairs into the left and right racks.
Step 5 Align the front sides of the speaker hosts with the cooling holes of the rear panel, and place the
speaker hosts to the left and right speaker chairs respectively.
Issue 07 (2013-11-08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Installing Telepresence Devices
Figure 11-25. Connect the
107