Huawei Telepresence TP3106 Installation Manual page 64

HUAWEI TP3106&TP3118S&TP3118 Telepresence
Installation Guide
Step 2 Mount the front panels to the joints between the left and center tabletop segments and the right
and center tabletop segments. The mounting method is the same for the left and right sides. The
following procedure uses the left side as an example. See
Figure 8-19 Mounting the front panel
1.
2.
Step 3 Secure the left and right tabletop segments with eight ST6_3 x 40 self-tapping screws. The
method is the same for the left and right tabletop segments. The following procedure uses the
left tabletop segment as an example. See
Issue 07 (2013-11-08)
Insert the front panel into the slot, and tighten the nuts using an open-end wrench with a
caliber of 8 mm to 10 mm.
Gently hammer the joints between tabletop segments using a rubber mallet until the
adjacent tabletop segments are on the same level.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing the Front Row of the Multi-Functional
Figure
Figure 8-20.
Conference Table
8-19.
59