Mitsubishi Electric MELSEC Q Series Reference Manual page 342

8 TROUBLESHOOTING
8 - 62
(2) H/W switch information
The following tables list the switch setting data for the master module.
2)-a: The switch settings for the hardware mounted to the master
module
Item
STx10
STx 1
MODE
2)-b: The switch data that has been actually set on the master module
Item
NETNO.
GRPNO.
STNO.
MODE
BAUD
CONFIG
(2) H/W information for remote I/O module
Use the following SB/SW to confirm the H/W information of the remote I/O
module.
For details, refer to Appendix 2 and Appendix 3.
Setting status of the remote I/O module
Operating status of the remote I/O module
10 position of station number setting switch.
1 position of station number setting switch.
Mode setting switch.
Description
Setting value of 0 to 239
network No.
Setting value of 0 to 9
group number
Setting of station 1 to 64 (7D
number
Setting value of 0: Online
operation mode 7: Self loopback-test
8: Internal self- loopback test
9: Hardware test
25 Mbps compatible 0: 10 Mbps
1: 25 Mbps
Return mode,
b15
parameter status
0
setting value
MELSEC-Q
Description
Display range
: remote master station)
H
b9 b7 b0
0 0 1
1: Fixed
Return mode
0: Remote master station returns as
master operating station
(control station).
1: Remote master station returns as
sub-master operating station
(standby station).
Parameter status
0: Without parameters for remote sub-
master station
1: With parameters for remote master
station/remote sub-master station
SB0040 to 44 SW0040 to 46
SB0058 to 69 SW0054 to 68
SB0047 to 49 SW0047 to 4A
8 - 62