Huawei OptiX OSN 2500 Quick Installation Manual page 20

7
Installing the RPC Frame
a
Exterior of the RPC Frame
The RPC frame is powered by the
tributary power output terminal on
the power cable terminal block on
the top of the cabinet. Straight-
through network cables are used
for the communication between the
RPC board and the subrack.
If the COM port on the AUX board is idle, you can connect the LAN port on the RPC board to the COM port
on the AUX board by using a network cable.
b
Installation Holes
c
Installation Procedure
1
1
Install the mounting ears.
Fan tray assembly
a b
2
Phillips screwdriver
2
17
RPC board
Holes for installing mounting ears of the
a
RPC frame in the T63 cabinet
Holes for installing mounting ears of the
b
RPC frame in the N63E cabinet
Secure the RPC frame on the columns.
Power module