Canon Staple Finisher-D1 Service Manual page 185

■
Adjusting the Height and Tilt
Caution:
If either of the difference in height between the finisher and the upstream connection machine or the tilt of the finisher is not within the specifications, adjust them following the
procedure explained below. Be sure to adjust the height before adjusting the tilt.
1) Open the front cover.
<Staple Finisher-D1>
F-6-83 F-6-83
6
Installation > Making Adjustments > Adjusting the Height and Tilt > Adjusting the Height and Tilt
<Booklet Finisher-D1>
6
Installation > Making Adjustments > Adjusting the Height and Tilt > Adjusting the Height and Tilt
F-6-84 F-6-84
6-32
6-32