Rear Alignment Motor (M109) - Canon Staple Finisher-D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Motors > Rear Alignment Motor (M109)

Rear Alignment Motor (M109)

2) Remove the clip and pulley. Remove the E ring, pulley, torque limiter,
1) Remove the processing
straight pin, and then free the belt from the shaft.
tray unit.
(Refer to page 4-30)
3) Remove the screw and turn the paper holder lever mount towards you.
4
Parts Replacement and Cleaning Procedure > Motors > Rear Alignment Motor (M109)
F-4-139
F-4-140
4-60
4-60