Canon Staple Finisher-D1 Service Manual page 186

2) While turning up the label so that the wrench can be seen, remove a screw and then detach the wrench.
[Staple Finisher-D1 only]
2) Remove a screw, and then detach the wrench.
[Booklet Finisher-D1 only]
6
Installation > Making Adjustments > Adjusting the Height and Tilt > Adjusting the Height and Tilt
x3
x1
6
Installation > Making Adjustments > Adjusting the Height and Tilt > Adjusting the Height and Tilt
F-6-85 F-6-85
F-6-86 F-6-86
6-33
6-33