Protective Conductor Connection And Shield Support - Siemens SINAMICS S120 Combi Manual

Additional system components
9.1 Terminal Module TM54F
9.1.8

Protective conductor connection and shield support

It is always advisable to shield the digital input and output wiring.
The following diagram shows a typical Weidmüller shield connection clamp for the shield
support.
①
②
Figure 9-5
NOTICE
Damage or faulty operation due to incorrect shielding or inadmissible cable lengths
If the correct shielding procedures or the permissible cable lengths are not observed, it can
cause damage or the machine may malfunction.
• Only use shielded cables.
• Do not exceed the cable lengths stated in the technical data.
208
Shield connection terminal, Weidmüller company, type: KLBUE CO1, Article number:
1753311001
Protective conductor connection M4 / 1.8 Nm
Protective conductor connection and shield support
SINAMICS S120 Combi
Manual, 11/2017, 6SL3097-4AV00-0BP7