Connection System; Drive-Cliq Signal Cables - Siemens SINAMICS S120 Combi Manual

12.5

Connection system

12.5.1

DRIVE-CLiQ signal cables

Note
Only MOTION-CONNECT 500 and MOTION-CONNECT 800PLUS DRIVE-CLiQ cables are
permitted for the connection. The maximum cable length for MOTION-CONNECT 500 cables
is 100 m, for MOTION-CONNECT 800PLUS cables 75 m.
The maximum permissible cable length for the use of DRIVE-CLiQ couplings is calculated as
follows:
ΣMC500 + 4/3 x ΣMC800PLUS + n
ΣMC500: Total length of all MC500 cable segments (fixed routing)
ΣMC800PLUS: Total length of all MC800PLUS cable segments (tow chain)
n : Number of DRIVE-CLiQ couplings (max. 0 ... 3)
C
Table 12- 6 Comparison between MOTION-CONNECT 500 and MOTION-CONNECT 800PLUS DRIVE-CLiQ cables
DRIVE-CLiQ signal cable
Approvals
VDE
cURus or UR/CSA
UR-CSA File No.
1)
in conformance with RoHS
Rated voltage V /V
0
in accordance with EN 50395
Test voltage, rms
Operating temperature at the surface
Permanently installed
Moveable
Strain, max.
Permanently installed
Moveable
Smallest bending radius
Permanently installed
Moveable
Torsional stress
Bending operations
Max. traversing speed
Max. acceleration
insulation material
SINAMICS S120 Combi
Manual, 11/2017, 6SL3097-4AV00-0BP7
x 5 m ≤ 100 m
C
MOTION-CONNECT 500
Yes
UL STYLE 2502/CSA-N.210.2-M90
Yes
Yes
30 V
500 V
-20 ... +80 °C
0 ... 60 °C
80 N/mm
2
30 N/mm
2
35 mm
125 mm
30°/m absolute
100000
30 m/min
2 m/s
2
CFC/silicone-free
Cabinet design and EMC
12.5 Connection system
MOTION-CONNECT 800PLUS
Yes
UL STYLE 2502/CSA-N.210.2-M90
Yes
Yes
30 V
500 V
-20 ... +80 °C
-20 ... +60 °C
50 N/mm
2
20 N/mm
2
35 mm
75 mm
30°/m absolute
10 million
300 m/min
Up to 50 m/s (3 m)
2
CFC/halogen-free/silicon-free
283