S120 Combi Power Modules
4.7 Installation
①
②
③
Figure 4-18
Burns due to incorrect mounting of the reinforcement plates
If the reinforcing plates are incorrectly mounted, this can result in an excessively high heat
sink temperature and cause the S120 Combi Power Module to prematurely trip.
Contact with hot parts may cause you to suffer a burn injury.
• Follow the installation instructions when mounting the reinforcement plates.
4.7.2.3
Technical data
6SL3161-1LP00-0AA0
Weight (2 units)
Dimensions (W x H x D)
94
Reinforcement plates
Holes to remove/tighten the screws on the air baffle plate of the S120 Combi
M4x10 screws
Installed reinforcement plates: View from the front and from the rear
CAUTION
Unit
kg
mm
Value
1.5
150 x 57.5 x 750
Manual, 11/2017, 6SL3097-4AV00-0BP7
SINAMICS S120 Combi