Testing Operations By Forced Output - Mitsubishi Electric MELSEC iQ-R Series Quick Start Manual

Testing operations by forced output

Module operations can be tested by forced output from an output (Y).
The following shows the procedure for forced output (Y).
Operating procedure
1.
Start CW Configurator.
2.
Select [Online]  [Monitor]  [Device/Buffer Memory Batch Monitor].
3.
The "Device/Buffer Memory Batch Monitor" screen appears. Enter a target device (start) for "Device Name", and click the
[Start Monitoring] button.
The following shows an example for "Y0".
3 FREQUENTLY-USED FUNCTIONS
60
3.2 Monitoring Module Status and Testing Operations