Mounting the modules
Mount the prepared modules on a base unit.
Precautions
Before mounting modules, be sure to power OFF the system.
Mounting procedure
(1)
(2)
(3)
1.
When a cap is attached to the module connector on the
base unit, remove it.
2.
Place the concave part (1) of the module onto the guide
(2) of the base unit.
3.
Push the module to the direction of the allow until the
module fixing hook (3) clicks to mount the module to the
base unit.
4.
Check that the module fixing hook (3) is fixed and the
module is mounted securely on the base unit.
2 USING C CONTROLLER MODULE
2.2 Configuring the System
2
7