Mitsubishi Electric MELSEC iQ-R Series Quick Start Manual page 51

■Storing the user program
Operating procedure
1.
Start Explorer, and enter the following address in the address bar.
ftp://192.168.3.3/0
After login to the C Controller module, the address is displayed as follows.
2.
Copy the created user program "R12_SampleProject.out" to the program memory '0' in the C Controller module by a
drag and drop operation.
The user program created in this guide is stored in the following directory:
C:\WindRiver\workspace\R12_SampleProject\ARMARCH7gnu_SMP\R12_SampleProject\Debug
2 USING C CONTROLLER MODULE
2.5 Programming
2
49