2
USING C CONTROLLER MODULE
2.1
Preparing for Operation
Prepare necessary devices.
1) C Controller system
For modules, refer to the
next page.
4) CW Workbench
(SW1DND-CWWR-E/EZ/EVZ)
*1 Install CW Configurator and CW Workbench on the same personal computer beforehand.
For installation of CW Configurator, refer to the following manual.
CW Configurator Installation Instructions
For installation of CW Workbench, refer to the following manual.
CW Workbench/CW-Sim Operating Manual
2) Personal computer
Installation*1
Windows -installed
personal computer
Installation*1
3) CW Configurator
(SW1DND-RCCPU)
5) Ethernet cable
Either a straight cable or
a cross cable
2 USING C CONTROLLER MODULE
2.1 Preparing for Operation
2
5