2.2
Configuring the System
System configuration example
This guide uses the following system configuration as an example.
(1)
(2)
(3)
(5)
No.
Name
(1)
Base unit
(2)
Power supply module
(3)
C Controller module
(4)
Output module
(5)
Cable
(Ethernet cable)
2 USING C CONTROLLER MODULE
6
2.2 Configuring the System
Model name
R35B
R62P
R12CCPU-V
RY40NT5P
An Ethernet cable that meets
10BASE-T/100BASE-TX/
1000BASE-T standards
(4)
Description
A unit to mount a power supply module, a C Controller module, and I/O modules.
A module which supplies power to modules, such as a C Controller module and
I/O modules.
A module which unifies control process of a C Controller system.
A cable which connects a personal computer in which CW Configurator and CW
Workbench are installed and a C Controller module.