Siemens C16 Series Instruction Set Manual page 80

JNB
Syntax
Operation
Data Types
Description
Condition Flags
Addressing Modes
Semiconductor Group
30Mar98@15:00h
Relative Jump if Bit Clear
JNB op1, op2
IF (op1) = 0 THEN
(IP) ← (IP) + sign_extend (op2)
ELSE
Next Instruction
END IF
BIT
If the bit specified by op1 is clear, program execution continues at the
location of the instruction pointer, IP, plus the specified displacement, op2.
The displacement is a two's complement number which is sign extended
and counts the relative distance in words. The value of the IP used in the
target address calculation is the address of the instruction following the
JNB instruction. If the specified bit is set, the instruction following the JNB
instruction is executed.
E Z
- -
E Not affected.
Z Not affected.
V Not affected.
C Not affected.
N Not affected.
Mnemonic
JNB bitaddr
Q.q
C166 Family Instruction Set
V C N
- - -
Format
, rel 9A QQ rr q0
80
Instruction Description
Version 1.2, 12.97
JNB
Bytes
4