Siemens Synco 700 Series Basic Documentation page 31

Assigning device
names
Action
Notes
Building Technologies
HVAC Products
We recommend that the device name be defined at the design engineering stage.
To assign a name, select the Service level
Main menu > Settings > Texts >
Texts
Dv name:
Write the text, via the "Texts" page and the line "Dv. Name" (= Device name):
• Turn the knob as required for access to the "Device name" page.
• Turn the knob clockwise and select a character.
• Press the knob to import the selected character to the text line.
Save the text line in the device:
• Turn the knob counterclockwise until the
• Press the knob to save the text line in the device.
• Press ESC (repeatedly) to return to the start page, and check the device name.
The device name may contain up to 21 alphanumeric characters (maximum 21
characters including spaces)
Device names cannot be assigned to the Synco 700 type RMZ78x extension
modules.
At the same time as the device address, a device name can be assigned with the
ACS Service software to every device (see section 5.2.1).
Basic documentation: Communication via the KNX bus
Device address and device name
and the following path:
OK
field is displayed.
31/120
CE1P3127en
30.08.2007