System Parameter Settings - Huawei PDU8000 Series User Manual

PDU8000 Modular Precision PDC V2.0
User Manual

Set an IP address for the Ethernet. The value ranges from 0.0.0.0 to 255.255.255.255. The
default value is 192.168.0.10.
Ensure that the IP address is unique on the network segment. Otherwise, the LCD cannot
work properly.

Set a subnet mask for the Ethernet. The value ranges from 0.0.0.0 to 255.255.255.255. The
default value is 255.255.255.0.

Set an Ethernet gateway. The value ranges from 0.0.0.0 to 255.255.255.255. The default value
is 192.168.0.1.

Set the serial port communications rate. The value options include 4800, 9600, and 19200.
The default value is 9600.

Set the serial port communications address. The value ranges from 0 to 254. The default value
is 1.

Indicates whether Modbus-TCP supports encryption transmission. The default value is
Enable.

Sets the secondary authentication for NMS access. The default value is Disable.

Set SNMP related parameters.

7.4.3.3 System Parameter Settings

On the Settings screen, tap System Param. to access the screen.
Issue 03 (2018-01-25)
 Automatic: The MDU automatically queries available IP addresses in the
connected network. Ensure that the MDU and PC are on the same network
segment.
You can set IP address allocation to Manual or Automatic. If the MDU restarts, IP address allocation
automatically changes to Automatic. The IP address is bound as the IP address set last time, allowing
you to log in for the second time.
IP address
Subnet mask
Gateway
Serial port baud rate
Serial port address
SSL
ModbusTCPcertification
SNMP Configuration
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 MDU Commissioning Guide
93