Huawei PDU8000 Series User Manual page 136

PDU8000 Modular Precision PDC V2.0
User Manual
Procedure
Step 1 Open the PDC rear door, push out the fuse terminal block, and remove the fuse of the
indicator to open the circuit. For details about the fuse position and how to remove it, see
8.4.5 Replacing a
Step 2 Open the PDC front door, and open the indicator protection panel.
Figure 8-4 Opening the indicator protection panel
Step 3 Loosen the screw at the back of the indicator using a Phillips screwdriver, and remove the
cables, as shown in
Figure 8-5 Replacing an Indicator
Step 4 Remove the retaining ring from the indicator and remove the indicator from the mounting
hole.
Issue 03 (2018-01-25)
Fuse.
Figure 8-5.
When removing cables, label the cables with corresponding terminal ports for later connection.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Maintenance Guide
127