3
Programming with ShopMill
3.3 Creating a sequential control program
Storing parameters
Program end
3-178
• Retraction with position patterns:
When working with optimized retraction , the tool travels in
relation to the contour across the workpiece at machining feedrate
and safety clearance (SC). On retraction to RP , the tool is
retracted to the retraction plane when the machining step is
complete and infeeds at the new position. Collisions with
workpiece obstacles are thus prevented when the tool is retracted
and fed in, e.g. when holes in pockets or grooves are machined at
different levels and positions.
Optimized retraction
Select with the
The parameters you have entered are stored. The machining plan is
then displayed.
ShopMill has automatically defined the program end.
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
Retraction to retraction plane RP
softkey.
Siemens AG, 2004. All rights reserved
3
10.04