Siemens SINUMERIK 840D Operation/Programming Manual page 7

0
10.04
Structure of the
documentation
Warnings
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
•
Any modification, bypassing or disabling of items of equipment
on the control that are required to ensure fault-free operation,
unlimited use and active and passive safety.
This documentation uses the following information blocks, identified
by pictograms:
Function
Background information
Operating sequence
Explanation of parameters
Additional notes
Software option
The function described is a software option. This means that the
function will only run on the control if you have purchased the relevant
option.
The following 5 warnings with varying degrees of severity are used in
this documentation.
Danger
Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury or in substantial property damage.
Warning
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury or in substantial property
damage.
Caution
Used with the safety alert symbol indicates a potentially hazardous
situation which, if not avoided, may result in minor or moderate injury
or in property damage.
0
Preface
vii