Entering A Tool In The List And Attaching It To The Spindle - Siemens SINUMERIK 840D Operation/Programming Manual

2
10.04

2.8.2 Entering a tool in the list and attaching it to the spindle

Preparing for loading
Jog
Entering tool in tool list
Tools
or
In
manual
Performing a tool change
Cycle Start
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
Select the "T, S, M" softkey in "Machine Manual" mode.
The cursor is positioned on the input field of tool parameter "T".
Press the "Offset" or "Tools" softkey to open the tool list.
Enter a new tool (as described in Sec. "Tools and tool offsets").
Press the "In manual" softkey.
You automatically return to function "T,S,M, ...". The tool name is now
entered in the input field of tool parameter "T".
Press the "Cycle Start" key.
Tool change is enabled.
The loaded tool is marked by a spindle symbol in the tool list.
Now load the tool manually into the spindle as described in the
machine manufacturer's instruction manual.
Operation
2.8 Manual mode
2
2-101