Siemens SINUMERIK 840D Operation/Programming Manual page 366

6
File Management
6.3 Program management with PCU 50
6.3 Program management with PCU 50
6-366
The ShopMill variant with PCU 50 has its own hard disk in addition to
the NC main memory. This makes it possible to store all programs
that are not currently required in the NC on the hard disk.
Display of the directory management of a floppy disk or network drive
and programs is also possible, as are the import and export of data
via an RS-232 interface.
ShopMill user interface PCU 50
edit
ShopMill programs ShopMill programs
ShopMill subroutines ShopMill subroutines
edit
G code programs G code programs
Data manage-
Network drive
ment list on
Diskette drive
hard disk
Data storage with PCU 50
You will find an overview of all directories and programs in the
Program Manager.
PCU 50 program manager
In the horizontal softkey bar, you can select the storage medium that
contains the directories and programs that you want to display. In
addition to the "NC" softkey, via which the data in the NC main
memory and the data management directories on the hard disk can
be displayed, a further 4 softkeys can also be assigned.
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
edit
edit
ShopMill programs
ShopMill subroutines
load
G code programs.
unload
save
NC main memory
 Siemens AG, 2004. All rights reserved
6
10.04
RS-232
interface