Functions Of The Web Server; View The Data Of The Sitop Ups1600 (Basic Device) - Siemens SITOP UPS1600 Manual

The language selection
The German, English, French, Italian, Spanish, and Chinese languages are available.
Grayed out menus
If the SITOP UPS1600 was assigned a SIMATIC S7 control as I/O device, or the
SITOP UPS Manager is connected to the SITOP UPS1600, then the web server is in the
read-only mode. The following applies in the read-only mode:
● No write access is possible; the parameter settings can only be read (input values shown
in gray, valid for software version up to V2.0)
● Firmware cannot be updated, the item is hidden.
3.6.3

Functions of the web server

Display
The following functions are available:
● View the data of the SITOP UPS1600 (basic device), see View the data of the SITOP
UPS1600 (basic device) (Page 115)
● View the energy storage data, see Viewing the energy storage data (Page 116)
● Alarm monitoring (pending alarms, alarm history), see Alarm monitoring (Page 116)
3.6.4

View the data of the SITOP UPS1600 (basic device)

1. Select the "Display" menu
2. Select the "Base unit" entry under "Operating data" in the navigation.
The "Base unit" entry provides the following information:
● Data of the SITOP UPS1600:
– Order number
– Serial number
– SW version
– HW product version
● Operating mode (normal or buffer mode)
● Ready for buffering
● Remaining buffer time
● Input voltage
● Load current
SITOP UPS1600 / UPS1100
Manual, 04.2016, A5E37775406-6-76
①
is used to select the user interface language of the web server.
Engineering and remote access
3.6 Web server
115