Siemens SITOP UPS1600 Manual page 74

Engineering and remote access
3.4 SIMATIC STEP 7
Maintenance
Parameter
R test interval
R test: The battery state is determined by subjecting it to a cyclic load.
Identification
Parameter
Contact
Location
● Contact
Enter, for example, a contact address or the name of a staff member.
● Location
Enter a description of the location that can be used to locate the SITOP UPS1600.
Web server
Parameter
Activate web server
Activate web server on this module
Permit access only with HTTPS
Log off automatically after 15 minutes
Set here whether access to the SITOP UPS1600 via web server is permitted.
Update interval: 0 / 5 s / 10 s / 20 s / 30 s / 60 s 10 s
● Activate web server on this module
Define whether this device can be accessed via the web server.
● Permit access only with HTTPS
Define whether access is only permissible via HTTPS.
● Download certificate
By pressing the "Download certificate" button, you can download the certificate for
encrypted connection via HTTPS.
● Log off automatically after 15 minutes
You define whether a user should be automatically logged off after closing the web
server.
● Update interval
You define in which intervals the actual values are sent to the web server.
74
Value range
1 ... 65535 h
Value range
Free text
Free text
Value range
Yes / No
Yes / No
Yes / No
Yes / No
Default setting
4 h
Default setting
No
No
Yes
No
SITOP UPS1600 / UPS1100
Manual, 04.2016, A5E37775406-6-76