Advertisement
8. SIMULATING THE HARDWARE STATUS
NOTE
If the "Setting" is not selected (that is, "---" is shown) or is the same as the
"Status" when you click Apply, the current "Status" does not change.
The following shows a list of items on the popup menu that are displayed when you
right-click each hardware item.
On the popup menu, the current status and the statuses that the current status can
transition to are displayed. Note that if the current status is the only status that can be
displayed on the menu, "None" is displayed shaded on the menu.
Fan
No.
Current status
1
Normal
2
Error
Internal Temperature
No.
Current status
1
Normal
2
Error
Drive
<Other than D Model>
No.
Current status
1
Healthy
2
SMART Detected Healthy, SMART Detected,
3
Overrun
4
Not Connected
(*1) In the case of models other than D Model, the equipment never starts without
drive bay1 being mounted, and consequently, Not connected" is not displayed
for drive bay1 on the popup menu.
(*2) Transition from "SMART Detected" or "Overrun" to "Healthy" means that the
target drive is replaced with a new one and that the new drive is connected.
(*3) We suppose transition from "Not Connected" means a new drive is connected.
Consequently, transition to "SMART Detected" or "Overrun" is not allowed.
Statuses in the popup menu
Normal, Error
Statuses in the popup menu
Normal, Error
Statuses in the popup menu
Healthy, SMART Detected,
Overrun, Not Connected
Not Connected
Healthy, Overrun, Not Connected
Healthy, Not Connected
8-10
Note
Note
Note
(*1)
(*1) (*2)
(*1) (*2)
(*1) (*3)
Advertisement
