Hitachi HF-BT1000 User Manual page 68

(3) SNMP trap configuration
1. In the "SNMP Service Properties" window, select the Traps tab.
2. Under Community name, type the name of the community that trap messages are
sent to, and click "Add to list."
3. Under Trap destinations, click Add. The "SNMP Service Configuration" window
is displayed. Enter the host name, IP or IPX address of a destination you want to send
traps to, and click Add.
4. In the "SNMP Service Properties" window, click Apply.
4. CHECKING THE HARDWARE STATUS
4-25