Advertisement
When the Hardware status window shows an error in hardware, resolve the
error immediately.
NOTE
• This window can display the status of the drives on the drive bay1 and 2
recognized at the OS startup, not the status of other drives. If you connect a
new drive or replace a drive with a new drive, for example, for maintenance, it
may take a long time to recognize the new drive at the first startup after the
new drive is connected, and the information about the drive may not be
displayed. If this situation happens, restart this equipment.
• For information about how to replace a perishable component, refer to
"HF-BT1000 INSTRUCTION MANUAL (manual number BT-62-0002)".
4. CHECKING THE HARDWARE STATUS
NOTICE
4-3
Advertisement
