Configuration Of Connectors And Terminal Blocks; Power Connectors Xa , Xb , Xc , Xd And Terminal Block - Panasonic MINAS A6B Series Reference Specifications

7. Configuration of connectors and terminal blocks

7-1 Power connectors
Size A, B 100 V / 200 V
Pin No. Symbol
5 L1
4 L2
XA
3 L3
2 L1C
1 L2C
6 P
5 N
XB
4 B
3 U
2 V
1 W
*Tighten the Earth screw with a torque of M4: 1.0 to 1.2 N · m.
R2.0
XA , XB , XC
Name
100 V
Main power input
terminal
200 V
100 V
Control power input
terminal
200 V
 To use an external regenerative resistor (customer prepared), connect an external
regenerative resistor between P and B.
Regenerative resistor
In addition, parameter setting is required for the regenerative resistor.
connecting terminal
For details, refer to "Technical Refarence - Functional Specification-"
 Do not connect anything to the N terminal.
Connect each phase of the motor wiring.
Motor output terminal
U
Earth terminal for grounding
Erath
, XD and terminal block
Description
Single-phase 100 - 120 V
For single-phase, the connector should be connected to the L1 and L3 terminals.
Single-phase/3 phase 200 - 240 V
For single-phase, the connector should be connected to the L1 and L3 terminals.
Single-phase 100 - 120 V
Single-phase 200 - 240 V
: : :
U phase, V V phase, W W phase
Industrial Device Solution Business Unit, Panasonic Corporation
No. SX-DSV03335 - 34-
+ 10 %
50/60 Hz
- 15 %
+ 10 %
50/60 Hz
- 15 %
+ 10 %
50/60 Hz
- 15 %
+ 10 %
50/60 Hz
- 15 %