Panasonic MINAS A6B Series Reference Specifications page 41

Size H 200 V
Use terminal blocks.
Terminal
No.
Symbol
(Upper to
bottom)
1 L1C
2 L2C
DB1
3
4 DB2
1 L1
2 L2
3 L3
4 P
5 B
6 N
7 U
8 V
9 W
*Tighten the Earth screw with a torque of M6: 2.4 to 2.6 N · m.
*Tighten the terminal block (upper side: control power supply, dynamic brake) screws with torque of M4: 0.7 to1.0 N · m.
If the tightening torque exceeds the maximum value, the terminal block may be damaged.
*Tighten the terminal block (lower side: main power supply, regenerative resistance, motor) screw with torque of
M6: 2.2 to 2.5 N · m. If the tightening torque exceeds the maximum value, the terminal block may be damaged.
*Tighten the fixing screw for the terminal block cover 1 (transparent) with torque of M3: 0.19 to 0.21 N · m.
*Tighten the fixing screw for the terminal block cover 2 (black) with a torque of M5: 2.0 to 2.5 N · m.
R2.0
Name
Control power
Single phase200 - 240 V
input terminal
· This is a terminal for controlling the electromagnetic contactor (MC) for
External external dynamic brake resistor (customer preparation). Please connect if
Dynamic brake necessary.
Control connection · The applied voltage between DB1 and DB2 must be AC 300 V or less, DC
100 V or less
Main power input
3phase 200 - 240 V
terminal
To use an external regenerative resistor (customer prepared), connect an
external regenerative resistor between P and B.
Regenerative
In addition, parameter setting is required for the regenerative resistor.
resistor connecting
For details, refer to "Technical Reference - Functional Specification ".
terminal
Do not connect anything to the N terminal.
Motor output Connect each phase of the motor winding.
terminal
U: U phase
Earth
Earth terminal for grounding
Description
+ 10 %
- 15 %
+ 10 %
- 15 %
V: V phase W: W phase
Industrial Device Solution Business Unit, Panasonic Corporation
No. SX-DSV03335 - 39-
50/60 Hz
50/60 Hz