Mitsubishi Electric 800 Series Instruction Manual page 34

Pr. Pr. group
*1*2 *1*2
CC-Link extended setting
544 N103
NET mode operation command source
*2 *2
550 D012
selection
Operation frequency during communication
779 N014
error
804 D400 Torque command source selection
810 H700 Torque limit input method selection
*1 Parameters which can be displayed when the plug-in option (FR-A8NC) is mounted.
*2 The setting is reflected after inverter reset or at the next power-on.
*3 "L.ERR" LED flickers if the setting is changed. If the inverter is reset, the setting is reflected and the LED turns off.
*4 For the parameter details, refer to the FR-E800 Instruction Manual (Function).
*5 Initial value for the RS-485 model.
*6 Initial value for the Ethernet model.
Name
0, 1, 12, 14, 18, 100, 112,
114, 118
0, 2, 5, 9999
0 to 590 Hz, 9999
0, 1, 3 to 6
0 to 2
Minimum
Setting range setting
increments
1
1
0.01Hz
1
1
INVERTER SETTING
Initial Refer to
value page
0 52
*4
9999
9999 38
0 78
0 78
4
33