Toro 2226 Operator's Manual page 22

137-7176
1. Engine—start
2. Engine speed—increase
3. Engine speed—decrease 12. Cam override function to
4. Pipe gripper arm—retract 13. Lower the stake (setup
5. Pipe gripper arm—extend 14. Rotate stake counter
6. Apply tread-joint
compound.
7. Elevator—raise
8. Elevator—lower
9. Pipe gripper—open/close
decal137-7176
10. Rotate the cam assembly.
11. Move to the next
or previous step in
SmartTouch™ mode.
rotate the cam assembly.
mode); rotate drill spindle
counter clockwise (drill
mode II)
clockwise (setup mode)
15. Rotate the stake clockwise
(setup mode)
16. Raise the stake (setup
mode); rotate drill spindle
clockwise (drill mode II)
17. Left stake controls
22