Table of Contents
Advertisement
Changing the Hydraulic-Fluid
Return Filter
Service Interval: Every 800 hours/Every 6 months
(whichever comes first)
1.
Move the machine to a level surface, shut off
the engine, and remove the key.
2.
Discard the old hydraulic-fluid return filter.
Figure 113
3.
Install a new hydraulic-fluid return filter.
Changing the Hydraulic-Charge
Filter
Service Interval: Every 800 hours/Every 6 months
1.
Move the machine to a level surface, shut off
the engine, and remove the key.
2.
Open the front hood.
3.
Place a drain pan under the filter.
4.
Using a filter wrench, remove the
hydraulic-charge filter
g229101
5.
Discard the old filter.
6.
Apply a thin layer of hydraulic oil to the o-ring
of the filter.
7.
Install and tighten the new filter with a filter
wrench.
8.
Start the engine, let it run idle for approximately
1 minute, then check for leaks around the
hydraulic-charge filter.
92
(whichever comes first)
(Figure
114).
Figure 114
g229100
Advertisement
Table of Contents
