Setting Up The Grc For Md - Kenwood DM-S500 Instruction Manual

Preparation
÷ Turn the system devices ON.
12
1
You may skip Step if the settings for the AV CONTROL CENTER
have already been made.
Once the settings have been made in Steps
to repeat these steps until you replace the batteries.
The GRC operation beginning on page 14 are written assuming
that the basic operations below have been completed.

Setting up the GRC for MD

1
At the initial screen, select the Model Type to
be used.
1
1
ENTER
2
2
The arrow ( ) shows
the direction that the
cursor moves when
selecting icons.
2
Select MD at the Setup menu screen.
1
1
ENTER
2
2
3
Select the control mode at the Setup MD
menu screen.
1
1
ENTER
2
2
4
Select MD at the Segment screen.
1
1
ENTER
2
2
1 3
to , you do not need
Use the joystick to select the model type.
Example:
Model 4
Press the ENTER key to set the entry.
Use the joystick to select the MD icon.
MD
Press the ENTER key to set the entry.
Use the joystick to select the control
mode.
System Control
IR
Press the ENTER key to set the entry.
The selected text moves to the bottom right
of the screen.
Use the joystick to select the MD icon.
MD
Press the ENTER key to set the entry.
Main
Menu
CD Tuner TapeA TapeB
Return Confirm
DVD MD LD Tape1
MD
Power
Title Search
: Keys and control used in the operations described
on this page.
Select
Model Type Setup
Model 1 Model 4
Model 2 Model 5
Model 3 Model 6
÷ The selected icon is highlighted.
÷ If the model type has already been selected, select the Setup icon to
display the Setup menu.
Select
Main
Menu
Tuner
Set Up
Setup
C D L D Tape1 VCR1
Sat. T V Cable VCR2
DVD/6ch Input
MD
Sound Speaker Reset
"System Control": To be selected when this unit is connected to the
Series 21 system through a control cord. With this selection, point the
remote control unit to the remote sensor of the AV Control Center or
receiver.
"IR": To be selected when the system control cord connection is not
used. With this selection, point the remote control unit to the remote
sensor of this unit.
Select
Main
Menu
Tuner
Return Set Up
Setup MD
System Control
IR
Select
Main
Menu
Tuner
Return Set Up
MD
Setup MD
System Control
IR
Operation of remote control unit
DM-S500 (En)
ENTER
TV VCR1 VCR2
Set Up
Cable Sat. VOLUME
10key
PGM
Mode MUTE
Edit
ON /STANDBY
REMOTE CONTROL UNIT
Screen after selection
Main
Menu
Tuner
Setup
C D L D Tape1
Sat. T V Cable
DVD/6ch Input
Sound Speaker Reset
Screen after selection
Main
Menu
Tuner
Return
Setup MD
System Control
IR
Screen after selection
Main
Menu
Tuner
Return
MD
Setup MD
System Control
IR
Screen after selection
Main
Menu
Tuner
Confirm
Return
MD
MD
Title Search
Set Up
VCR1
VCR2
MD
Set Up
6
Set Up
Set Up
10key
PGM
Mode
Edit