Table of Contents
Advertisement
5
Start recording.
RC operation
1
¶
Pressing the pause (8) key also allows to cancel record-pause mode
and start recording.
2
Play the input source to be recorded.
6
After recording, eject the Mini Disc.
AUTO/MANU. key
This key is used to select whether track numbers are to be marked
automatically during recording or they are to be marked manually during
or after recording. The track numbers can be used to locate the beginning
of a track during playback or programming tracks.
RC operation
Select before starting recording.
AUTO/
MANU.
Extinguished in "AUTO" mode, lit in "MANUAL" mode.
GRC operation
ENTER
(Main unit only)
0
GRC operation
Mode
ENTER
Auto/Manual
ENTER
MANUAL
L
30 10 5
3
1
0
R
Recording is not possible if the following characters are displayed.
DISC FULL
"
"
: Disc is full
PROTECTED
"
" : The accidental erasure protect tab is open.
PLAY ONLY
"
" : A playback-only Mini Disc is loaded.
WRITING
Information is being
written.
÷ The eject key is not accepted during recording.
While "WRITING" is displayed, do not impact or
move the unit because information about recording
Note
Note
Note
and editing is being written to the Mini Disc.
AUTO
If a no-sound input has lasted for 2 seconds during recording, the track
number will be incremented automatically by "1". Usually, use this
position for recording. Use this mode when recording all of the tracks in
a CD. When recording music containing a continuous section with a very
low level, for example when recording classic music, the track number
may be incremented by "1" after such a section. In this case, cancel the
track number later. It is recommended to use the MANUAL mode when
recording such a kind of music.
At the time of digital recording, the track number automatically is
incremented by one on the basis of the information of the digital signal.
There is no detection of unrecorded parts. A track without sound can be
produced by stopping the CD on the playback side.
MANUAL
The signal is recorded without automatic incrementation of track num-
bers. A track number can be assigned during recording (press the EDIT
key) or after recording (operate the TRACK DIVIDE function
This position is convenient when recording live sound or classic music
containing long pianissimo sections onto disc.
( dB)
\Erase undesired tracks.
\ Close it.
\ Load a recordable Mini Disc.
EJECT
N O
Mini Disc has been ejected.
Recording
DM-S500 (En)
23
fl
y
u
D I S C
¤
).
Advertisement
Table of Contents
