Table of Contents
Advertisement
Displayed messages and actions to be taken against them
50
Displayed Message
UNLOCK
SCMS ON
DISC FULL
TITLE FULL
BLANK DISC
NO TRACKS
READING
WRITING
DISC ERROR
CAN'T EDIT
? (blinking)
PROTECTED
PLAY ONLY
CAN'T LOAD
CAN'T COPY
Meaning
÷ An attempt is made to record digital signal from
a source using other sampling frequency than
38kHz, 44.1 kHz, 48 kHz.
÷ The optical fiber cable is unplugged or loose.
(The connector is not connected.)
÷ An attempt is made to record digital signal from
a source while its digital copy has been prohib-
ited by SCMS.
÷ There is no recordable area on the disc.
÷ An attempt is made to record a 256th track.
÷ An attempt is made to assign a title with more
characters than usable.
÷ The disc does not contain any recordings.
÷ The disc does not contain any tracks but has a
disc title.
÷ The TOC* 1 data of the disc is being read.
÷ The data related to editing or recording is being
written in the disc.
÷ The contents of UTOC *2 are abnormal.
÷ An attempt is made to perform editing beyond
the restrictions, for example to erase a track
which is too short.
÷ This is a message for confirming if editing can
really be executed.
÷ The Mini Disc is in the "WRITE PROTECT"
condition.
÷ A playback-only Mini Disc is loaded.
÷ A CD corresponding to CD-TEXT has not been
inserted into the CD player.
÷ The CD player is not connected via an optical
fiber cable.
÷ Title copying may not be possible, depending
on the disc.
In case of difficulty
Action
÷ Use analog recording.
÷ Connect the optical fiber cable correctly.
÷ Use analog recording.
÷ Use another recordable disc.
÷ More than 255 tracks cannot be recorded per
disc.
÷ Refer to "Total number of title characters".
÷ When playback is required, use a recorded
disc.
÷ The disc can be used for recording without
any problem.
÷ This is a normal operation.
÷ This is a normal operation.
÷ Perform "QUICK ERASE" to delete all titles
+ +
+ + ALL?". If this is not possible, use another
"+
disc.
÷ Perform editing following the restrictions.
÷ Press the ENTER key to execute editing.
÷ Release the "WRITE PROTECT" condition.
÷ Load a recordable Mini Disc.
÷ Set a CD corresponding to CD-TEXT into the
CD player.
÷ Connect the CD player with an optical fiber
cable and match the REC INPUT of the MD
recorder.
÷ The titles of this disc can not be copied.
(Replace the disc.)
DM-S500 (En)
™
67
™
‚
fl
y
u
Advertisement
Table of Contents
