How To Edit Titles - Kenwood DM-S500 Instruction Manual

When titles are assigned to a disc and its tracks, the titles
cannot only be displayed during playback but title search
40
(searching a track by the title) is also made possible. The
assigned titles can be changed or deleted with the same
procedure.

How to edit titles

1
Activate the title input mode.
RC operation
1
Press the TITLE INPUT key.
2
Select the title to be edited.
To return
÷ With repeated operation while 2 or 3 is being displayed, the track
No. or the preset title (PRE1 to 9) will be selected.
3
Set the selection.
To abort operation, press the TITLE INPUT key again.
Total number of title characters
Up to 1792 characters can be input per disc and up to 80
characters can be input per track. (In case of alphanumeric
and symbol characters)
A space (blank character) also required the same amount
of data as alphanumeric characters. When deleting a title,
it is not recommended to overwrite spaces on previous
characters but use the (CLEAR/DELETE) function.
TITLE
INPUT
4 ¢
To advance
SET
: Keys and control used in the operations described on this page.
TOTAL
D I S C
Each press of the 4 ¢ keys switches the operation.
1 DISC (Disc title)
2 001 (Track title)
3 PRE1 Pops (Preset title)
4 ALL ERASE? (Complete erasure of disc and track titles)
5 TEXT LOAD?
In case of disc title :
Select "DISC".
REMAIN TITLE
D I S C ÷ ÷ ÷ ÷ ÷
In case of track title :
Select the desired track No.
REMAIN TITLE
÷ ÷ ÷ ÷ ÷
0 0 1
In case of preset title :
Select the desired preset No.
REMAIN TITLE
P R E 4 J a z z
Preset title list : (Initial setting)
PRE1 Pops = PRE2 Rock = PRE3 Classic =
PRE4 Jazz = PRE5 Disco = PRE6 Best Hits =
PRE7 Air Check = PRE8 No. = PRE9 Vol.
Complete erasure of disc and track titles :
REMAIN TITLE
A L L E R A S E ?
Editing
DM-S500 (En)
TITLE
MANUAL
÷ ÷ ÷ ÷ ÷
L
30 10 5 3 1
R
-
( dB)
0