Table of Contents
Advertisement
4
Play the CD player.
5
After recording, eject the Mini Disc.
To pause recording
RC operation
8
÷ Press the key again to resume recording. At this time, the track number
is incremented by "1".
÷ Recording can also be started by pressing the ¶ key.
In regard to the MONITOR key
The sound of commercial digital equipment (BS tuner, DAT, etc.) connected to DIGITAL 2 can be monitored. However, when this unit is used as a
general single component, the input source (sound) selected by REC INPUT can be heard.
RC operation
Operate in stopped condition.
MONITOR
During CD recording, the track number is sometimes incremented by 1 when the CD starts to be played. This is caused
by a signal contained in the digital signal components recorded on the CD. Unnecessary track numbers can be deleted
by referring to "Erasing several tracks at a time (QUICK ERASE)" or "Erasing a single track during playback (TRACK
ERASE)".
(Main unit only)
0
GRC operation
ENTER
GRC operation
Mode
ENTER
Monitor
ENTER
: Keys and control used in the operations described on this page.
÷ To record music with a margin from the beginning, it is recommended
to start the CD playback after the time display of the MD recorded has
started the count.
WRITING
EJECT
Information is
Mini Disc has been ejected.
being written.
While "WRITING" is displayed, do not apply shock
or vibration to the unit because information is being
Note
Note
Note
written on the Mini Disc.
To stop recording
RC operation
7
0 0 1
÷ When the sampling frequency of the digital input signal is not 48 kHz,
44.1 kHz, or 32 kHz, "UNLOCK" will be displayed and no sound will be
heard.
Recording
DM-S500 (En)
N O
D I S C
GRC operation
ENTER
"MONITOR" Lights
MONITOR
L
( dB)
30 10 5
3
1
0
R
fl°
25
Advertisement
Table of Contents
