DOK-MOTOR*-1MB********-IT01-EN-P
Rexroth 1MB Kit Spindle Motor
6
Assembly
6.1
General Information
Screw lock
The machine manufacturer has to consider the special characters
of his construction and must work out special mounting instruc‐
tions for the rotor and stator motor components. The machine
manufacturer's mounting instructions are the only binding guide‐
lines.
The project planning manual
sembling the rotor and stator components. This suggestion can be under‐
stood a guideline to estimate the necessary assembly effort and to prepare
the neccessary implements for assembly.
The scope and sequence of the steps described in the project planning man‐
ual can be influenced by the special features of the machine construction and
the process.
All screwed connections must be secured against potential impacts and vi‐
brations during operation of the machine. A suitable and field-tested screw
lock for all metal thread connections is, e.g., Loctite 243.
Loctite 243 is a liquid screw lock (medium-hard) and is applied to the parts to
be mounted immediately prior to assembly. For detailed information on the
proper handling and processing, please refer to the manufacturer's data
sheets under http://www.loctite.de. The manufacturer's homepage also pro‐
vides information on hardening accelerators or other screw locks.
Bosch Rexroth AG
Rexroth 1MB contains suggestions on as‐
31/61
Assembly