Table of Contents
Advertisement
DOK-MOTOR*-1MB********-IT01-EN-P
Rexroth 1MB Kit Spindle Motor
2
Safety Instructions
2.1
About this Chapter
2.2
Appropriate Use
Please observe the general safety instructions in this chapter and the safety-
related guidelines and handling instructions in this manual. This will prevent
personal hazards, material damage and errors.
This manual must be stored by the user during the whole product
lifetime and passed on when selling.
Handle the motor components carefully in each situation. Please
especially observe the safety notes and notes about strong per‐
manent magnets on the secondary part.
Prerequisites for appropriate and safe use of the motors are proper transport
and storage, correct assembly and connection and careful maintenance and
operation.
The motors have been designed for installation in industrial machinery. The
motors comply with the following standards and directives.
Standards
DIN EN 60034-1
Rating and performance
DIN EN 60034-5
Degree of protection
Directives
2006/95/EC
EC Low Voltage Directive
(Appendix III B)
The machine manufacturer must evaluate the electric and mechanic safety
as well as environmental influences in the assembled state of the machine
according to the Machine Directive 2006/42/EC and DIN EN 60204-1 (Safety
of Machines).
The electric installation must comply with the protection requirements of the
EMC Directive 2004/108/EC. The proper installation of the system (for in‐
stance physical separation of signal and power cables, use of shielded ca‐
bles ...) is the responsibility of the plant manufacturer. The converter manu‐
facturer's EMC instructions must be observed.
The machine may not be commissioned before conformity with these direc‐
tives has been determined.
Bosch Rexroth AG
15/61
Safety Instructions
Advertisement
Table of Contents
