Table of Contents
Advertisement
32/61
Bosch Rexroth AG
Assembly
6.2
Mechanical Installation
6.2.1
Assembly Stator
The machine manufacturer has to consider the special characters
of his construction and must work out special mounting instruc‐
tions for the rotor and stator motor components. The machine
manufacturer's mounting instructions are the only binding guide‐
lines.
●
The stator may only be connected with the machine on one
of the stator front sides.
●
All screwed connections must be provided with a liquid
screw lock. See also
●
The necessary screw length for fastening the stator depends
on the machine construction.
●
The screwed connections must be able to take up both the
force due to the weight of the motor and the forces acting
during operation.
Assemble the stators in line with the machine manufacturer's installation in‐
structions. The machine manufacturer must consider the special character of
his construction and must work out special mounting instructions.
The project planning manual
tions for general guidance. It describes a schematic structure without consid‐
ering constructive specials of the machine. The procect planning manual also
show parts that are required but are maybe not included in the Bosch
Rexroth delivery and must be appropriately dimensioned and provided by the
user.
Starting position at assembly: The motor components lie flat on a clean and
flat base.
1. Check whether the components are damaged. Damaged components
may not be mounted.
2. Hold tools, auxiliary material, measuring and test equipment ready and
make sure that the rotor can be mounted in a clean, dry and dust-free
environment.
3. Check all components and mounting surfaces, holes and threads, as
well as the O-ring grooves on the stator to verify that they are clean and
free from burrs. Everything must be clean, stainless and completely free
from burrs. Clean and deburr such areas if necessary.
4. Prior to assembly, clean the contact surfaces of the stators with a suita‐
ble cleaning agent (e.g., RIVOLTA A.C.S.3).
5. Grease the O-rings (type dependend) with an ordinary lubricant grease
and mount the O-rings in the stator grooves provided. Avoid twisting and
soiling of the O-rings.
6. Screw the lifting eye bolts which are required for transport in mutually
opposite threaded holes.
Ensure cleanliness during all of the working steps!
DOK-MOTOR*-1MB********-IT01-EN-P
Rexroth 1MB Kit Spindle Motor
"Screw lock" on page
31.
Rexroth 1MB includes installation instruc‐
Advertisement
Table of Contents
