Finalizing And Verifying The System Configuration - Hitachi NAS Platform 4000 Series Hardware Reference Manual

18. Reconfigure the server to the previous settings:
IP addresses for Ethernet ports 0 and 1
■
Gateway
■
Domain name
■
Host name
■
The SMU should recognize the node as the same and allow it to be managed.
19. Navigate to Home > Server Settings > License Keys to load the license keys.
20. Repeat steps for any other replacement servers to be configured.

Finalizing and verifying the system configuration

On the new server:
Procedure
1. Navigate to Home > Status & Monitoring > System Monitor to verify the server
status:
If the server is operating normally, and is not displaying any alarm conditions,
■
run a backup to capture the revised configuration, and then download another
diagnostic to support. Permanent license keys for the new server will be
provided within 15 days.
If the server is not operating normally for any reason, contact support for
■
assistance.
2. Navigate to Home > Status & Monitoring > Event Logs, and then click Clear Event
Logs.
3. Confirm all final settings, IP addresses, customer contact information, service
restarts, client access, and that customer expectations are all in place. Features such
as replication and data migration should all be confirmed as working, and all file
systems and storage pools should be online.
Hitachi NAS Platform and Hitachi Unified Storage Series 4000 Hardware Reference
Appendix A: Server replacement procedures
Finalizing and verifying the system configuration
122