State
Medium
Flash
Fast Flash
Off
State
Amber
Slow Flash
Medium
Flash
Off
10/100 private Ethernet ports
The 10/100 Private Ethernet Network ports function as an unmanaged switch for the
private management network (refer to the Network Administration Guide for more
information on the private management network). These ports are used by the server
and other devices (such as an external SMU and other cluster nodes) to form the private
management network. There are no internal connections to the server from these ports;
instead, when joining a server to the private management network, you must connect
from one of these ports to the management interface port on the server.
The 10/100 ports operate at speeds of up to 100 megabits per second, and require the
use of a standard RJ45 cable connector.
The 10/100 Private Management Ethernet Network ports are labeled as shown next:
Figure 17 10/100 Private Management Network Ethernet Ports Label
Once connected, each 10/100 port has two indicator LEDs; one green and one amber.
These LEDs provide link status and network activity status information as follows:
Hitachi NAS Platform and Hitachi Unified Storage Series 4000 Hardware Reference
The server is available to host file services but is not currently doing so.
Flashes once every .8 seconds.
The server is rebooting. Flashes 5 times per second.
The server is not powered up.
Table 13 Sever Status LED (Amber)
Critical failure and the server is not operational.
System shutdown has failed. Flashes once every three seconds.
The server needs attention, and a non-critical failure has been detected.
For example, a fan or power supply has failed. Flashes once every .8
seconds.
Normal operation.
Chapter 4: Hitachi NAS Platform server components
10/100 private Ethernet ports
Meaning
Meaning
47