Operation Procedure - Hitachi EUP-B512 Instruction Manual

3

Operation Procedure

1) Confirm that the probe and the Magnetic sensor attachment are
disinfected or sterilized.
2) Connect the probe to the ultrasound diagnostic scanner, operate
the scanner, and adjust the image, all according to the
instructions given in the operation manual for the ultrasound
diagnostic scanner with which the probe is used as connected.
3) Confirm the direction of the probe. The relationship between
the direction of the probe and the image is shown in Fig.2. The
Right-left orientation mark on the image indicates the direction
of the needle guide bracket mount part of the probe.
Fig.2 The Relationship between the direction of the
probe and the Right-left orientation mark
Needle guide bracket
mount part
Right-left
orientation mark
- 5 - Q1E-EP0780